#8:
When the
pool is not in
use slide the
outside
portion of pool
ladder up until
the cams en-
gage into the platform recesses.
Install padlock through the lad-
der rail as shown.
- 6 -
Step #4
continued
#7:
Using the braces as hole lo-
cators, drill two ¼” holes through
the pool top seat being careful
not to damage pool liner or wall.
Attach the ladder to the pool us-
ing two 1/4” – 20 x 3-1/2” bolts,
washers and hex nuts.
OUTSIDE TREADS MUST BE IN THE UP POSITION AND
LOCKED AT ALL TIMES WHEN POOL IS NOT IN USE.
Safety Rules
■
Locate ladder on a solid base.
■
One person on the ladder at
a time.
■
Ladder MUST be installed per
manufacturer’s instructions.
■
DANGER:
No Jumping or
Diving from ladder.
■
Face ladder when entering
and leaving pool.
■
To prevent entrapment or
drowning —
DO NOT swim
through, behind or around
ladder.
■
Ladder to be used as a
swimming pool ladder only.
■
Weight limit -
300 lbs. maximum
■
Warning:
Exceeding the
maximum weight restriction
may cause the ladder to fail.
■
When ladder is not in use,
slide up outside ladder
section and lock using
padlock. Ladder must be
locked at all times when not in
use or when there is no
qualified adult supervision.
■
Consult your local Building
Department before installation
of your pool and equipment.
■
DANGER:
Use a cordless
drill for assembly and
installation.
NEVER use an
electric drill in or around the
pool.