- 4 -
Tools Needed: Rubber Mallet, cordless drill with Phillips bit
#3:
Using a rubber mallet, tap
the tread connectors on to the
locking slide tread. Repeat for
remaining slide treads.
#4:
Repeat step two to align the
rectangular holes in the remain-
ing tread connector with the tabs
on the slide treads. Turn slide
ladder assembly on edge and
tap tread connector down until
firmly seated.
#5:
Align the hole in the locking
cam with the round tab on the
locking slide tread and tap down.
It may require several hits with
rubber mallet. Repeat on the
other side.
#6:
Flip ladder assembly on to return rail side, lift and angle away.
Insert the slide ladder assembly into the grooves in the outside
rails assemblies and slide it all the way down to stops.
#7:
Adhere safety/warning stick-
ers to platform and rail assem-
blies as shown.
Step #3
continued