- 2 -
Tools Needed: Cordless drill with Phillips bit
Step #1
#3:
Place outside rail assembly
on a flat surface. Place a return
rail over one of the outside rails
so that notches in the hooked
ends overlap and fit together
smoothly.
#4:
Attach rails using two
#10 x 1-1/4” self-tapping screws
(one in the designated mark on
the inside rail and one on the
outside rail). Repeat for remain-
ing return rail.
#5:
Place rail assembly on edge
with return rails up. Position
platform so that tabs in platform
align with top holes in rails. Tap
in with rubber mallet. Position
remaining rail assembly so that
the tabs in platform align with
top holes in rails and tap in with
rubber mallet. Next tap both
sides platform down until firmly
seated in rails.
#6:
With lad-
der assembly
still on edge.
Position bot-
tom tread so
tabs align with
the notches at
the bottom of
the rail assem-
blies and tap
in until tread
is properly
seated.
Parts needed to complete
step #1.
#1:
Place Lower Side Rail on
a flat surface with notched end
facing up. Place Upper Side Rail
notched side down so it overlaps
the Lower Side Rail and both
pieces fit together smoothly.
#2:
Connect the Upper and
Lower Outside Rails together
using two #20 x 1/4” x 7/8” bolts
and two 1/4-20 hex nuts. Repeat
to assemble second Outside
Rail.