ACCESSORIES
DISCHARGE AIR NOZZLE KIT ASSEMBLY
The optional discharge nozzle kits are used to direct the conditioned
air to a specific target area. By concentrating the airflow, the nozzles
increase the air velocity towards production lines to cool personnel
and/or equipment. In server rooms, the nozzles can be used to
direct the airflow through the rack to remove the hot air from the
area of the equipment.
2NK-1
for model PAC12
, (2) 4-inch diameter nozzles with an
approximate compressed length of 15 inches. The approximate
extended length is 21 inches.
2NK-2
for models PAC18, PAC24
(2) 6-inch diameter nozzles
with an approximate compressed length of 22 inches. The
approximate extended length is 32 inches.
2NK-3
for models PAC36 and PAC60
, (2) 8-inch diameter
nozzles with an approximate compressed length of 20 inches. The
extended length is approximately 29 inches.
The nozzle kits come pre-assembled with the nozzles secured to a
mounting plate and with edge guards. By removing the discharge
grille, you can insert the nozzle kit into the opening without the use
of tools.
Nozzle Kits
Kit Voltage
PC-1P 115V
PC-2P 208-230V
CONDENSATE PUMP KIT
A plug-in condensate pump kit is available for applications where emptying the 5 gallon
condensate tank is not practical. The pump kit consists of a condensate pump with
mounting hardware and electrical connections, along with the tubing required for the drain
and discharge of the condensate water.
PARTS LIST
(1) Condensate Pump with mounting
hardware
(1) 3/8-inch drain hose, 20 ft
(2) Mounting screws
(1) Drain hose — black corrugated
(2) Hose clamps
Pump Kit
Plug-in kit is for models with serial number G4 or higher (Oct. 2003 or later).
The condensate pump provides for the
automatic removal of condensate water during
the cooling process. The pump is capable of
pumping to a 20 foot height, allowing for the
routing of the drain line above the
drop-ceiling to a nearby drain. The pump is
controlled by an internal float-switch/check
valve, which turns the pump on and off auto-
matically. The pump is also equipped with a
condensate over-flow safety switch that will
shut down the unit compressor when the pump
is not working properly.
11
Summary of Contents for AIR BOSS PAC12
