manualshive.com logo in svg

Oce VL3622, User Manual

The Oce VL3622 User Manual is your comprehensive guide to operating and maximizing the potential of your product. This manual is available for free download at manualshive.com, ensuring easy access anytime, anywhere. Dive into detailed instructions and unleash the full capabilities of your Oce VL3622 with this essential manual.

Share
Download
background image

VL3622/VL4222/VL5022

13-17

Appendix

13

Reference Allowed Level

A feature for specifying settings so that only certain people are able to view 
certain destination information for the purpose information security. When 
synchronized with user authentication, only information with an access per-
mission level matching that specified for the user can be viewed.

Relay broadcast

This is a function to send the broadcast the fax via other fax (called "relay dis-
tribution station"). When there are multiple broadcast destinations at distant 
places, one of the broadcast destination is specified to the relay station and 
the entire amount of the communication charges can be reduced by doing the 
relay transmission from the relaying station.

Relay distribution station

A feature to broadcast the fax to the relay distribution destination by receiving 
the relay request from the relay instruction station.

Relay instruction station

The fax machine that sends the relay broadcast request.

Resolution

An index for scanning granularity. The higher the value, the finer the quality and 
the longer the transmission time becomes. Select an optimal resolution for the 
purpose.

Scan size

This is a function to specify the scanning size of a document and transmitting 
it. If the width of the paper in the recipient’s fax machine is smaller than that of 
the transmitted document, the fax is normally reduced when it is printed. If you 
do not wish to reduce the fax, specify a document size that is same as the size 
of the paper in the recipient’s fax machine in order to send the fax at its original 
size.

Sender Fax No.

The identifying code for the mutual recognition when transmitting faxes. Nor-
mally the fax number is registered as the fax ID.

Sender Name

The name assigned to the local machine. On the recipient machine, this name 
is printed as a part of the sender stamp at the edge of the transmitted text.

Sending

Making a call. Regarding fax operations, it is to send an original or to dial for 
polling.

Sub-scanning direction

The vertical direction for scanning the original.

Super G3 (SG3)

This is a G3 communication mode compliant with ITU-T V.34. The communi-
cation can be carried out at a higher speed (max. 33,600 bps) than that of the 
usual G3 communication.

Temporary Forward transmission

This is a function to manually forward the received document on hold, by using 
the setting confirmation button of the control panel. The transmission is used 
when the fax/scan screen is been displayed, or the operation is being stopped 
due to paper misfeed or running out of paper.

Timer TX

This function performs transmission jobs at a preset time. It is economical to 
communicate using telephone discount rate hours in early morning and late at 
night.

Transmission reservation

This is a function to reserve the next transmission while current transmission 
or printing.

Transmission source record

When a fax has been sent, the transmission time, name, telephone number, 
page number that is to be printed at the edge of the document saved on the 
recipient’s machine.

Transmission speed

For a fax machine, the transmission speed refers to that of the fax modem.
In this function, the fax can be communicated at a high transmission speed of 
33,600 bps. When overseas communication mode is set, it communicates at 
a noise-resistant high transmission speed at 7,200 bps or 4,800 bps.

Transmission time

The time needed to send a fax. The higher the resolution or larger the paper, 
the longer the transmission takes.

TSI

Abbreviation for Transmitting Subscriber Identification. ID of the fax transmis-
sion terminal.

V. 34

This is a communication mode used at the time of fax communication of super 
G3. There are cases when the communication is not possible in super G3 
mode depending on the telephone line conditions when the recipient’s ma-
chine/ own machine is connected to a telephone line via private branch ex-
change. In such cases, it is recommended to communicate with super G3 
mode turned off by deselecting the V. 34.

Z-Folded Original

This function first confirms the document size which cannot detect correct 
document size due to folds, then scans and sends the document data after 
verifying the correct document size. This function can be used only when the 
document is scanned by ADF.

Term

Definition

Summary of Contents for VL3622




























































































































































































































































































































































Reviews:

No comments

Related manuals for VL3622

Canon imagePROGRAF iPF8400 Basic Manual preview
imagePROGRAF iPF8400
Brand: Canon Pages: 157
Canon JX210P On-Screen Manual preview
JX210P
Brand: Canon Pages: 91
Oki 86 Specifications preview
86
Brand: Oki Pages: 4
Lanier LD360 Brochure & Specs preview
LD360
Brand: Lanier Pages: 6
Xante Accel-a-Writer 8300 Maintenance And Specifications preview
Accel-a-Writer 8300
Brand: Xante Pages: 12
Xerox 3635MFP - Phaser B/W Laser Evaluator Manual preview
3635MFP - Phaser B/W Laser
Brand: Xerox Pages: 16
Xerox PHASER 6140 Quick Manual preview
PHASER 6140
Brand: Xerox Pages: 4
Oki C6150 Series Reference Manual preview
C6150 Series
Brand: Oki Pages: 104
Canon Pixma TS7700i Series Manual preview
Pixma TS7700i Series
Brand: Canon Pages: 554
Oki MC560n Specifications preview
MC560n
Brand: Oki Pages: 4
Olivetti ARTJET 20 User Manual preview
ARTJET 20
Brand: Olivetti Pages: 22
Roland Texart RT-640 Setup Manual preview
Texart RT-640
Brand: Roland Pages: 44
Konica Minolta bizhub 160 Service Manual preview
bizhub 160
Brand: Konica Minolta Pages: 20
Parkside PGG 15 C2 Translation Of The Original Instructions preview
PGG 15 C2
Brand: Parkside Pages: 104
Printronix P9212 Setup Manual preview
P9212
Brand: Printronix Pages: 206
Unytouch UPI3FL-80mm User Manual preview
UPI3FL-80mm
Brand: Unytouch Pages: 12
Tally T2140 Maintenance Manual preview
T2140
Brand: Tally Pages: 14
Xerox  Manual preview

Brand: Xerox Pages: 48

Brands by name

Popular brands

Load more brands