Oce VL3200x, Quick Setup Manual

Page: 32 / 53

31
For Wireless Network Users
Wireless Ne
twork
Windows
®
M
acintosh
Connecting the Océ machine to the wireless network
18 Configure the wireless
settings (Typical
Wireless Setup in
infrastructure mode)
a
On your machine, press Menu , 7 (
Network
),
2 (
WLAN
), 2 (
Setup Wizard
).
Press or to choose
On
, then press OK .
b
The machine will search for available SSIDs. If
a list of SSIDs is displayed, use or to
choose the SSID you wrote down in step
17
on
page 30, then press OK . Go to step
f
.
If your access point is set to not broadcast the
SSID, you will have to manually add the SSID
name. Go to step
c
.
c
Press or to choose
<New SSID>
and
press OK . Go to step
d
.
d
Enter the SSID you wrote down in step
17
on
page 30 using the dial pad to choose each
letter or number.
You can use and to move the cursor left
and right. For example, to enter the letter
a
,
press the 2 key on the dial pad once. To enter
the number
3
, press the 3 key on the dial pad
seven times.
The letters appear in this order: lower case,
upper case and then numbers.
(For more information, see
Entering Text for
Wireless Settings on page 44.)
Press OK when you have entered all the
characters.
e
Press or to choose
Infrastructure
,
then press OK .
f
Use the , and OK keys to choose one of
the options below: If your network is configured
for Authentication and Encryption, you must
match the settings used for your network.
„ No Authentication or Encryption:
Choose
Open System
, press OK then use
or to choose
None
for
Encryption Type?
and press OK . Then
press 1 for
Yes
to apply your settings. Go to
step
k
.
„ No Authentication with WEP Encryption:
Choose
Open System
, press OK then use
or to choose
WEP
for the
Encryption Type?
and press OK .
Go to step
g
.
„ Authentication with WEP Encryption:
Choose
Shared Key
and press OK .
Go to step
g
.
„ Authentication with Pre-Shared Key
(WPA/WPA2-PSK) (TKIP or AES)
Encryption:
Choose
WPA/WPA2-PSK
and press OK .
Go to step
h
.
„ Authentication with LEAP:
Choose
LEAP
, press OK . Go to step
i
.
„ Authentication with EAP-FAST/NONE,
EAP-FAST/MS-CHAPv2, EAP-FAST/GTC
(TKIP or AES Encryption):
Choose
EAP-FAST/NONE
,
EAP-FAST/MSCHAP
(EAP-FAST/MS-
CHAPv2) or
EAP-FAST/GTC
, press OK . Go
to step
j
.
g
Choose the appropriate key number and press
OK . Enter the WEP key you wrote down in
step
17
on page 30 using the dial pad to
choose each letter or number.
For example, to enter the letter
a
, press the 2
key on the dial pad once. To enter the number
3
, press the 3 key on the dial pad seven times.
The letters appear in this order: lower case,
upper case and then numbers.
(For more information, see
Entering Text for
Wireless Settings on page 44.)
Press OK when you have entered all the
characters, then press 1 for
Yes
to apply your
settings. Go to step
k
.
Note
It will take several seconds to display a list of
available SSIDs.