Oce VarioPrint 6000 Plus Line, Maintenance Manual

Page: 55 / 102

Lift the clean units
Procedure
CAUTION
Hot area. Use heat-resistant gloves.
CAUTION
Make sure that both clean units are locked in the upper position.
1. Use the red handle to lift the right-hand clean unit to the upper position (1).
2. Use the red handle to lift the left-hand clean unit to the upper position (2).
[63] Lift the clean units
When you press [Next] on the operator panel, a dialog box appears.
IMPORTANT
A sheet on one of the spiral cleaners or on both spiral cleaners will seriously damage the
machine.
3. Check whether there is a sheet on one of the spiral cleaners.
If not, go to step 4. If there is, go to step 5.
4. Press [No] if the spiral cleaners do not have sheets on them.
5. Press [Yes] if there is a sheet on one of the spiral cleaners. Now you must follow the procedures
for removing, reconditioning and installating of the sheet cleaners and spiral cleaners
Replace the
cleaners on page 14 .
Lift the clean units
Chapter 3 - Maintenance tasks - Level 2 55
Océ VarioPrint 6000 line