Oce VarioPrint 4110, User Manual, Page: 12 / 216

12 Chapter 1 Safety information (GB)
Instructions for safe use
Surroundings
■
Do not block the ventilation openings of the machine.
■
Ensure that the machine is placed on a level, horizontal surface of sufficient
strength. See the Product Safety Data Sheet in this Safety manual for information
about the weight of the equipment.
■
Ensure that there is sufficient space around the machine. This facilitates
maintenance.
■
Do not place the machine in rooms which are subject to excessive vibration.
■
Do not place the machine in rooms which are too small and insufficiently
ventilated. See the Product Safety Data Sheet in this Safety manual for
information about the recommended minimum room volume and ventilation.
Radio interference suppression
CE radio interference suppression
This is a Class A product. In a domestic environment this product may cause radio
interference in which case the user may be required to take adequate measures
(Directive 2004/108/EC).
FCC radio interference suppression
This equipment has been tested and found to comply with the limits for a Class A
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference when the equipment is
operated in a commercial environment.
This equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instruction manual, may cause harmful
interference with radio communications. Operation of this equipment in a residential
area is likely to cause harmful interference in which case the user will be required to
correct the interference at his/her own expense.
Canada Class A Notice - Avis Canada, Classe A.
This Class A digital apparatus complies with Canadian ICES-3.
Cet appareil numérique de la classe A est conforme à la norme NMB- 003 du
Canada.
Machine cooling
To guarantee sufficient air flow for cooling purposes, take care that the front doors
of the engine module and the full length of the back of the machine are free of
obstacles over a distance of at least 30 cm.