Oce VarioPrint 2045-65 NC, Job Manual

Page: 122 / 213

120 Océ VarioPrint 2045-65 NC Job Manual
Before you begin
■
To insure that your copy job settings are correct, make a test copy. Make
sure that the settings do not result in lost image information or gray borders.
Making an enlarged or reduced copy with the automatic document feeder
1
Place and align the originals face down in the automatic document feeder.
Follow the feed direction according to the dimensions and orientation of the
information on the originals.
2
Select the 'Copy' mode .
The 'Basic' section automatically opens.
3
Select '1-sided' or '2-sided' in the 'Original' and 'Copy' function boxes.
4
Select 'Yes' or 'No' in the 'Staple' function box.
5
Activate the 'Paper' section.
Make sure that the 'Paper input' card is open.
6
Select the required size and orientation in the 'Source' function box.
The selected size is shown in the 'Paper' section.
The enlargement or reduction is automatically adjusted and is displayed in the
'Basic' section.
[76] Select the size. The enlargement or reduction is automatically adjusted
[76] Select the size. The enlargement or reduction is automatically adjusted
7
Activate the 'Extra' section.
Open the 'Original type' card.
Keep the setting or change the original type.
8
Open the 'Copy type' card.
Keep the setting or change the copy type.
9
Select the number of copies.
10
Press the start key .