Oce VarioPrint 2045-65 NC, Job Manual

Page: 118 / 213

116 Océ VarioPrint 2045-65 NC Job Manual
Copying a 5 x 8 original with the platen
1
Place and align the original face down on the platen.
Use the long-edge feed direction.
2
Select the 'Copy' mode .
The 'Basic' section automatically opens.
3
Select '1-sided' in the 'Original' and 'Copy' function boxes.
4
Select 'No' in the 'Staple' function box.
5
Activate the 'Paper' section.
Make sure that the 'Paper input' card is open.
6
Select 5 x 8 in the 'Source' function box.
[73] Select 5 x 8
[73] Select 5 x 8
Note:
If the trays do not contain 5 x 8 paper, add 5 x 8 paper to tray 1 (see ‘Add
paper to the paper trays’ on page 166).
Note:
If the required size is not 5 x 8, adjust the 'Enlargement or reduction'(see
‘Make an enlarged or reduced copy’ on page 119).
7
Select the number of copies.
8
Press the start key .