background image

Safety information (US)

21

Safety data sheets

Introduction

The disclaimer below applies to all safety data sheets in this manual. Contact 
your local Océ organization for questions about Océ products regarding health, 
safety and environment. You can find the address of your local Océ 
organization in appendix C of this manual.

Disclaimer 

The safety data sheets in this manual have been compiled to the best of our 
knowledge. They are intended as a compact guide for the safe handling of this 
product. We reserve the right to revise safety data sheets as new information 
becomes available. It is the user's responsibility to determine the suitability of 
this information for the adoption of safety precautions as may be necessary. It 
is the user's responsibility to contact Océ in order to insure that the safety data 
sheets are the latest ones issued. If and in so far as limitation of liability is 
permitted under the applicable laws, we do not accept liability for any 
inaccuracy that may occur in this information. 

Note:

Not all safety data sheets were available at the moment this manual was 

published. The Océ organization in your country will be pleased to send you a 
copy of the missing sheets. You can find the address of the Océ organization in 
your country in appendix C of the user manual.

Summary of Contents for TCS400





























Reviews: