Oce TCS400, Self Support Manual

Page: 12 / 28

12 Océ TCS400 Self-support guide
Use the wizards to achieve optimal output quality
When to do
Before you initialize the 'Optimize print quality' wizard, verify the following:
■
Did you define the correct media type for your job? Define the correct
media for optimal output quality
■
Did you define the correct print mode settings for your job? (see ‘Defining
the correct job settings for optimal output quality’ on page 9)
After verifying that you used the correct media and the correct print modes, use
the 'Optimize print quality' wizard to solve the following problems with your
printed output:
■
Regular horizontal light or dark bands on the output
■
White stripes in filled areas
■
The length and width measurements are different from the original
■
The colored lines are not aligned or are blurred
■
Missing sections in lines or stepped lines
■
Parts of characters are missing
■
Drop-out caused by nozzle problems.
Chapter 7 of the user's manual includes complete information on how to
optimize print quality.
Before you begin
During the 'Optimize print quality' wizard, the system performs a calibration.
The calibration is only possible on one of the following media types indicated
below. Before you start the wizard, first load and define one of these media
types on the printer.
■
Standard paper
■
Premium coated paper
■
Bond
■
Coated bond
■
Matte photo paper
■
High gloss photo paper
■
Deluxe bond.