Main parts
Main parts
#
Description
Part
Remove jammed booklets from the space here.
Infeed section
A
The transport belt unit TC3 feeds the sheets to
the trimmer. If booklets jam in the trim section
entrance, hold the green handle and open this
mechanism to remove the jammed booklets.
Entrance transport belt
unit (TC3)
B
• To open the unit, hold and press the handle,
• Pull to the right
• Lift the mechanism up
Transport belt unit
C
The hand wheel helps you to solve booklet jams.
When booklet jams occur between the infeed sec-
tion and the trim section,turn the hand wheel
clockwise and transport the booklet completely to
the trim section. Then pull out the trim unit and
remove the jammed booklet.
Hand wheel (TC1)
D
The waste tray collects the trim waste from trim-
ming the booklets. The printer displays an error
message when the tray is full. When you empty
the tray, make sure to remove the trim waste that
dropped outside the tray.
Trimmer waste tray
E
Use the green handle TC2 to pull out the trim
unit.
Handle (TC2)
F
The transport belts move the booklets.
Transport belts
G
• Hold and press the handle.
• Open the belt unit to the right to remove the
jammed booklets.
Transport belt unit
H
The transport belt unit TC4 moves the booklets.
It contains a handle with a green label to remove
jammed booklets.
• To open the unit, hold and press the handle,
then
• Open to the right.
Transport belt unit
(TC4)
I
Chapter 2 - Parts and their functions
18
Trim section
Summary of Contents for Booklet Trimmer-D1
