Oce 75, User Manual

Page: 86 / 131

4-18 Print Controller User’s Guide
Chapter 4 Control Panel Setup
•
How to change [Image Shift]
Available only when [On] is selected in [Image Shift] of printer driver.
To show the [Image Shift Screen], touch the [Image Shift]. Set the [Image Shift] on the
[Image Shift Screen]. To return to the [Printer Check Mode Screen], touch [EXIT] on the
[Image Shift Screen].
7. Touch the [PROOF PRINT] to print one copied set for proofreading.
8. Touch the [Exit] to return to the print mode basic screen.
9. Press [START] to resume the rest of the print job.
When you change the settings, press [STOP] to cancel the print job, and change the
settings on the printer properties on your computer.
How to check the job - Wait Mode - Wait:
This method is used only for confirming the settings on the control panel without
printing.
On your computer:
1. Right click the printer icon and then click the properties to display the printer
properties dialog.
2. Select [Wait Mode] from the upper list of [Features] in [Paper] tab of the printer
properties window and select [Wait] from the list by clicking the [
▼
] button of the
lower box of the [Features].
3. Start to print.
On the control panel:
4. The settings are displayed on the LCD.
The [Printer Check Mode Screen] will appear on the LCD touch screen and no printing is
performed.
5. Confirm the current settings.
Change setting values of [Print Quantity], [Duplex Mode] or [Image Shift], if
necessary.
(Refer to the above mentioned procedure : How to check the job - Wait Mode -
Proof, 6.)
6. Press [START] button to resume the rest of the print job.
When you change the settings, press [STOP] to cancel the print job, and change the
settings on the printer properties on your computer.