Oce 75, User Manual

Page: 44 / 131

3-18 Print Controller User’s Guide
Chapter 3 Printer Driver Functions
Password Print
When [Password Print] is checked, you can use password print (confidential output)
function to print the confidential documentation.
In this method, both settings on computer and the operation from the LCD touch panel
are used. Default is [Off].
Refer to “Chapter 4 Control Panel Setup
■
Print Job
●
Password Print (Confidential
Output)” (p. 4-21) for password print procedure.
Settings
Open the [Password Print Settings] dialog for password setting.
Enter your user ID in the [UserID] text box. You can select any 8-digit number for the
User ID.
Enter your password in the [Password] text box. You can select any 8-digit number or
character for the Password. You can also select the following marks:
[ (space) ], [ . ], [ - ], [ _ ]
When the Password is entered, the password of [Job Combination Print Settings] dialog
for Password Print is replaced with the password of [Password Print Settings] dialog.
You must enter the same password (8 digits or less) in the User ID text box that
you set up on the copier for Printer ECM.
If you do not enter the correct password or if you leave the User ID text box
blank, the print job is not performed and is registered as Unsuccessful jobs.
When in doubt about the password for Printer ECM, ask your system
administrator.
Features
Features use the special functions of the main body printer, with which you can set up
the various printing and finishing method.
When you select a function you would like to use from the upper list, an actual setting of
the function you selected will be shown on the lower box.
You can select the other setting of the function you selected from the list shown by
clicking the [
▼
] button of the lower box.
Features you can select are as follows: