Oce 75, User Manual

Page: 118 / 131

Appendix A-4 Print Controller User’s Guide
Appendix A Troubleshooting
●
Memory Overflow
1. Depending on the functions selected in the printer driver, occasional memory
overflow may occur if the volume of the print job is large. In this case the print
job is cancelled.
e.g., Booklet, Fold & Stitch, 2 in 1, etc.
In case of frequent Memory Overflow it is recommended that you extend the memory capacity
in the main body printer (copier).
When an error message “Print Controller Memory Overflow” is displayed on the LCD Touch
Screen using Duplex printing or Application function, you may cancel the print job and retry to
print with another function.
●
HD Full
Hard-disk full occurs when 1% of total disk capacity is used by the print/scan jobs; If the
disk capacity is 2 GB, the HD Full is 20 MB free space.
Under the HD Full condition, the following message is displayed on the front panel of
the main body printer.
Printer HD Full
Please free HD space
1. Remove the scan job in the HD on network computer.
Refer to “Chapter 5 Scanner Operation
●
To Delete Scanned Data” (p. 5-19) for deletion the
scanned data.
2. Output the password print job in the HD from control panel.
3. When the [Delete After 24H] is selected in the [Set Default] - [Scan Data AutoDel.]
on the control panel of the Copier, the print controller automatic timer deletes
the jobs from the HD which exists for more than 24 hours.
Under HD Full:
The print job can not be printed.
If the scan job starts, the job is canceled automatically. The following message is dis-
played on the control panel.
Printer HD Full
Scan JOB was canceled
You may want to view the scan job canceled at this time.
To do this, touch [NON COMPLETE JOB LIST] in the Job Status Screen.