Oce 75, User Manual

Page: 63 / 131

Print Controller User’s Guide 3-37
Chapter 3 Printer Driver Functions
Font
Name
You can select only one font per watermark from the list shown by clicking the [
▼
]
button.
When you change the font, the preview window will refresh itself by showing the effect
of the new font on the existing text sample displayed there.
The default font name is [Arial].
Color
Select the color of watermarks.
Select [Black], [Dark Gray], [Light Gray], or [White] from the color palette shown, by
clicking the [
▼
] button.
Darkness
You can control the “density” of the watermark text with this slider. If you slide this to
the right, the “density” of the watermark text will be more dense. If you slide this to the
left, it will be less dense.
Bold & Italic
When [Bold] is selected, bold formatting will be applied to your selected watermark
text.
When [Italic] is selected, italic formatting will be applied to your selected watermark
text.
When both of these are selected, bold and italic formatting will be applied.
Size
Select a point size for the font to be used in your watermark by clicking the [
▲
] or [
▼
]
button or by directly entering the size from the keyboard.
Position
Control the position of the watermark on the page manually or leave it at the auto-
matic setting and let the driver position it for you.
If you select [User defined], the controls below this option will be available and you
can define X axis position (left and right) and Y axis position (up and down) of the
watermark on the page by clicking the [
▲
] or [
▼
] button or by directly entering the
values from the keyboard (0-100).
The value of [X] or [Y] represents the placement of origin (beginning) of the water-
mark in a percentage of the total page width. In case of [X], a value of 20% means the
watermark begins 20% of the way across the page from left to right. In case of [Y], a
value of 20% means the watermark begins 20% of the way down the page from top to
bottom.