23
Prepare a ceiling cut-out
> 196 x 196 mm in size.
The power supply unit can no longer
be accessed through the opening
after the mounting board has been
installed. An inspection flap should
therefore be provided at another
location.
Power lines should be routed before
the mounting board is installed and
these should be guided to the open-
ing of the mounting board.
Luminaire connection cable from
the converter or extension cable
with socket
3d pico plug (mounting board)
External
Occhio converter
230 V AC
mains cable
Connecting an external Occhio
converter (see supplementary sheet
for the converter):
Lengthen the cable provided, if neces-
sary, and connect it to the external
converter.
Connect the converter to the mains
cable as shown in the wiring diagram.
Caution:
The socket for the luminaire con-
nection cable must be inserted into
the protective cover.
Tape together the security wire and
LED cable just after the plug, as
shown in the illustration.
The cable and security wire can only
then be pulled out after fitting.
Summary of Contents for 3d body pico
