Occhio 3d body pico, Mounting Instructions

Page: 52 / 96

4
Mounting options:
3d pico is available in the “up” (surface-mounted/solid ceilings), “flat” (hollow
ceiling/ceiling box), “plug” (hollow ceiling with mounting board) and “track” (1- or
3-phase bus bar) mounting variants.
io head:
LED ceiling/wall spotlight with spherical
head and lens optics. Movable in any di-
rection thanks to Occhio 3D kinematics
with two pivots set at an angle of 45° to
each other; operation via heat-insulated
grip pads. Head can be taken off for
maintenance; replaceable LED.
Power 18 W or 13 W (preselectable);
dimmable via customer-supplied dim-
mable power supply unit or by hand
movement control via touchless dim-
ming function (can be deactivated).
Lighting effect can be changed through
optional inserts; dichroitic colour filter
can be additionally inserted.
Surface combinations of head, pads,
stem and base can be configured as
desired; pads replaceable.
Read through the mounting/use
instructions carefully before install-
ing the luminaire. Follow the safety
precautions in these instructions
closely and keep the instructions in
a safe place.
Explanation of symbols
This symbol warns you of a danger-
ous situation which could lead to
serious injury or even death if the
instructions are not observed. It
also draws your attention to pos-
sible material damage and provides
other important information in con-
nection with this product.
This symbol warns you of hot sur-
faces, which could cause burns if
touched.
This symbol draws your attention to
situations in which you could look
directly into the light of the LED.
This may cause an after-image ef-
fect and may result in damage to the
eyes if you look at the light directly
for prolonged periods.
General safety precautions
The assembly and installation of
electrical components must be car-
ried out only by qualified personnel.
Repairs must be carried out only by
authorised, qualified personnel or
the manufacturer.
Before performing any work on the
spotlight (installation, changing the
light source, cleaning, etc.), it must
be disconnected from the mains
supply.
0.2m
Maintain the minimum safety
distance from flammable materials:
20 cm.
Caution: When used for prolonged
periods, the surface of the spotlight
can become hot.
Before performing any work on
the spotlight (fitting the spotlight,
changing the light source or insert,
etc.), always switch the spotlight
off and let it cool for at least 30
minutes.
Product description Safety precautions