- 16 -
-Google Link
Remarks: Send this command to the tracker and then you receive an SMS with an http link. Click on the link then the location
can be shown directly on Google Map on your mobile phone. For example:
http://maps.google.com/maps?f=q&hl=en&q=22.540103,114.082329&ie=UTF8&z=16&iwloc=addr&om=1
(Note: Only smart phones and PDA support this function.)
Change Password
W******,001,######
W000000,001,123456
Remarks: To change user’s password. ###### is the new password. Password should be 6 digits.
Track by Interval
W******,002,XXX
W000000,002,030
Remarks: To set interval for automatic timed report.
XXX is the interval in minute. If XXX=000 to turn off tracking by time.
In this example, the tracker will send location data back to your mobile phone every 30 minutes.
Authorization
W******,003,F,P,T1
(W******,003,F,P,T1,T2)
W000000,003,3,1,88888888
W000000,003,3,1,88888888,99999999
Remarks: To authorize phone numbers for the buttons/inputs for receiving location reports or SMS alarms or phone calls.
F=0, to turn off this function; (default)
F=1, only send SMS to the authorized phone number;
F=2, only call the authorized phone number;
F=3, both SMS and calling
P=1, set an authorized number for SOS button (Input 1)
P=2, set an authorized number for B button (Input 2)
P=3, set an authorized number for C button (Input 3)
T1: Preset phone number. Max.16 digits
If you need to set different numbers for receiving SMS and phone call, you can then use W******,003,F,P,T1,T2, In this case
T1 is the phone number for receiving SMS and T2 for receiving phone call.
Low Battery Alarm
W******,004,X
W000000,004,2
Remarks: When the tracker’s voltage is lower than the preset value, it will send an SMS alarm to the authorized phone number
for SOS.
X is the preset value of voltage.
=0 , to turn off this function
=1, <3.3V
=2 , <3.4V
=3 , <3.5V (default)
=4 , <3.6V
=5 , <3.7V
Speeding Alarm
W******,005,XX
W000000,005,08
Remarks: When the tracker speeds higher than the preset value, it will send an SMS to the authorized phone number for SOS.
XX is the preset value of speed and in 2 digits.
=00 , to turn off this function
=[01, 20] (unit: 10Km/h)
In this example, when the tracker’s speed is over 80km/h, an SMS alarm will be sent out.
Movement Alarm
W******,006,XX
W000000,006,06
