OCB OCB-GT-06, User Manual

Page: 15 / 22

- 14 -
14. Heartbeat
Command : W******,015,data
Description : Set an interval for heartbeat.
Note :
data is the interval in unit of minute
data=0, to turn off this function;
data=1~65535, set interval for heartbeat.
Example :
W000000,015,10
In this example, the tracker will send heartbeat every 10 minutes.
15. Power Down
Command : W******,026,XX
Description : Make the tracker into power down mode when it is inactive or immobile for a period of time.
In Power Down states, GPS stops working and GSM enters sleep and stop sending out message until it is
activated by message, incoming calls or movement or triggered by three buttons.
Note :
XX=00, to turn off this function.
XX=01~99, to turn on Power Down after a specified period of being inactive (or stationary). It is in unit of
minute.
Example : W000000,026,10
The tracker will enter power down mode after it is inactive (or stationary) for 10 minutes.
16. Initialization
Command : W******,990,099###
Description : This is to make all settings (except for the password) back to factory default.
Note : Turn on the device, press the SOS button for five times continuously and the red LED will be on, and
then send (within 120 seconds) this SMS to the tracker.
### is the ending character and is required in the text message.
Example : W000000,990,099###
17. Password Initialization
Command : W888888,999,666
Description : This is to make the password back to factory default in case you forget your password.
Notes : Turn on the tracker, press the SOS button for five times continuously and the red LED will be on, and
then send this SMS (within 120 seconds) to the tracker to make the password back to factory default