obsta OFP-CAB-8E-RW-240-HIA, Installation And Operation Manual

Page: 31 / 37

31
SECTION 4.0 - MAINTENANCE
4.1 Obstaflash beacon
No special or preventive maintenance is required for the obstaflashs, but only that which can be
performed on an as-needed basis.
4.2
Obstaflash power supply
No special maintenance is to be done on the power cabinet except when it is necessary, however it is
recommended to tight screws once a year
4.3
Photocell
The only maintenance required for this unit is the periodic cleaning of the Photocells. Frequency of
cleaning will depend on the environment to which they are exposed
SECTION 5 – SPARE PARTS
Beacon-obstaflash
PROJECTOR-RW-4L………………………...……………………………..113761L4
Power supply
COMMAND CARD 48VDC JOUR….…………..…….……..……....….....113744L
COMMAND CARD 48VDC CRESP NUIT...……...……………….….......113744R
POWER CARD B 48VDC….…………………………………….…………113741B
EQUERRE ET BOUTON VOYANT HI…………………………………....113743B
FAULT TRANSMITTER CARD ……….……………………………........113749B
DS215-230/G……………....….………..……………………..…………….451721
POWER SUPPLY 230VA 600W………………………… ...………......…113742
Controler
COMMAND CARD ………………..…………..…….……..…………........113744
EQUERRE ET BOUTON VOYANT HI…………………………………....113743B
FAULT TRANSMITTER CARD ……….……………………………........113749B
DS215-230/G……………....….………..……………………..…………….451721
POWER SUPPLY 230VA 600W…………………………...………........…113742
Photocell
CELLULE 500LUX 48V (twilight)…..………………….……..……….….113136
Photo Cell 48VDC..(night)……………………………………….…………100755
DS215-230/G……………....….………..……………………..…………….451721
POWER SUPPLY 230VA 600W…………………………...…..……......…113742