19
R4, R8, R16 DVR V8.1.0 User Manual
Columns on the PTZ menu include:
•
Channel
: Channel name
•
Signal Type
: Analog for analog channels, Analog & Digital for IP channels.
•
Protocol
: Choose the communication protocol between the PTZ capable camera and DVR. If your camera support UTC (Up the
Coax) function, you can choose COAX1 or COAX2 to display your camera OSD menu or control the UTC PTZ function.
•
Baudrate
: The speed of the information sent from the DVR to the PTZ camera. Make sure it matches the compatibility level of
your PTZ camera.
•
DataBit / StopBit
: The information between the DVR and PTZ camera is sent in individual packages. The DataBit indicates
the number of bits sent, while the EndBit indicates the end of the package and the beginning of the next (information)
package. The available parameters for DataBit are: 8, 7, 6, 5. Options for the StopBit are 1 or 2.
•
Parity
: For error check. See the documentation of your PTZ camera, to configure this setting.
•
Cruise
: Enable to use the Cruise mode. In order to use the Cruise mode, you need to set a number of preset points.
•
Address
: Set the command address of the PTZ system. Please be noted that each PTZ camera needs a unique address to
function properly.
3.2.3 PTZ control panel
To open the PTZ control panel, click on the camera video in the Live display, and then click the PTZ control panel icon on the Camera
Quick Setting toolbar. Three menus / control panels are available: UTC, PTZ and PRESET.
UTC - Up the Coax
Use the PTZ menu to navigate and configure the camera using the OSD menus. These menus are usually different for all types of
cameras.
SECTION 3: CHANNEL - LIVE DISPLAY