12
www.Observint.com
To use this menu:
a. If you are
NOT
adding network IP cameras to the NVR for monitoring, click
Next
to continue, and to to the step: “6. In the
Disk menu... on page 13.
b. To add network cameras to the NVR for monitoring:
i.
Click the icon in the
Edit
column for a channel where a camera is not assigned. In the example above, channels 2
through 8 are not assigned.
ii.
In the
Edit Connection Information
menu, open the
Switch Mode
drop down list, and then select
Manual
Mode
. Click
OK
to close this menu.
iii.
In the
IP Camera
Wizard window, click the
Search
button in the lower left corner. A list of compatible IP
cameras installed on the network will appear in the left frame.
iv.
To add a network camera from the search results list, check the select box for the camera you want to add, and
then click the
Add
button (blue right arrow button) in the middle of the window. An
Add IP Camera
menu will
open.
SECTION 2: INITIAL SETUP