Manual | NEP-695
Status: Final | Not confidential
Page 20 | 51
V20221009
7 Charging & maintenance
7.1 Charge NEP-695
Follow these instructions to charge the NEP-695 logging probe:
1. To avoid any risk of water ingress falling onto the electronics, flip the probe up-side down, hold the
main body of the probe tight and unscrew the control lid off (make sure to let the water evacuate and
dry the lid completely). Undo the protecting cap from the logging probe by turning anti-clockwise until
turning has no-longer any effect. Then, firmly disengage the cap from the internal protective O-ring
(hear the click).
2. Charge the NEP-695 logging probe by placing the provided charging adapter into the centre pin and
apply power to the logging probe.
3. It will take on average eight hours to fully charge the logging probe from flat battery.
Firmly remove
the cap
downwards
Turn the cap
anti-clockwise
