Manual | NEP-695
Status: Final | Not confidential
Page 33 | 51
V20221009
13. When finished, select disconnect on the Personal Computer (PC) configuration software.
14. Disconnect the Micro-USB cable from your computer and from the NEP-695 probe and place the
protective cap back onto the probe. Firmly press down to engage the O-ring (and ensure the sealing).
Once engaged, screw the cap by slowly turning clockwise until the cap is fully screwed on.
Note: Do not over-tighten the cap as the sealing is ensured by the engagement O-ring (not the level
of tightness). Tightening too much the cap will damage the thread and may result in leaking.
Firmly press the
cap downwards
Turn the cap
clockwise
