Manual | NEP-695
Status: Final | Not confidential
Page 16 | 51
V20221009
6 Mechanical installation
6.1 Connect NEP-695 to a single NEP-5000
The following section describes how to connect a single NEP-5000 sensor to the NEP-695 logging probe.
Please proceed as follows in order to avoid damaging the NEP-695 connector:
•
Firmly hold the NEP-5000 probe. Adjust the NEP-5000 male connector to fit the female NEP-695
connector.
•
Turn the NEP-695 moving part clockwise to attach the logging probe to the NEP-5000 sensor. Always
loosely hold the NEP-695 moving part while firmly holding the NEP-5000 sensor (in order to avoid
damaging the NEP-695 connector).
The following block diagram represents the connection of the NEP-695 connected to a single sensor:
Figure 6.A: Connect NEP-695 to a single NEP-5000
Always firmly
hold NEP-5000
Always loosely
hold NEP-695
moving part
Always firmly
hold NEP-5000
