WWW.OBPLTD.COM
6. C
ALIBRATION
5. Fully depress each pedal and you should see each rotation
respond on the window, if each pedal responds then windows
has successfully installed the drivers and the pedal data is being
received by the PC.
6. If the PC is not responding to the pedals being pushed then you
may need to go to Settings > Calibrate and simply re-calibrate
the pedals by fully depressing each pedal on their correct Axis.
X Axis: Clutch
Y Axis: Brake
Z Axis: Accelerator
Please note that the brake pedal must be successfully bled for the
calibration to work successfully.
