43 | EN
EÜK screed-covered duct system
Information on the product
No.
Product name
Figure
Function
6
Height compensa-
tion set
If the floor structures differ from the standard height-ad-
justment heights, then the underfloor junction boxes/
underfloor device sockets can be converted to the requi-
red height using the height compensation set.
7
Protective moun-
ting lid
The mounting protection lid protects the interior of the
underfloor junction box/underfloor device socket during
mounting.
8
Quick release aid
The quick release aid is required for toolless height
adjustment and subsequent decoupling of the socket top
frame from the socket base. The quick release aids are
available as an option.
Item no. 7410160
The screed-covered underfloor installation ducts for the EÜK sys-
tem and the corresponding accessories are produced from approx.
1 mm strip-galvanised steel (zinc coating 275 g/m²). The ducts are
available in the widths 190, 250 and 350 mm and in the heights 28,
38 and 48 mm and are supplied ready for mounting with a length of
2,000 mm.
To separate different voltage levels and stabilise the ducts, they
have asymmetrically/symmetrically arranged separating retainers
in the lengthwise direction. The duct width of 190 mm is equipped
with a separating retainer, the width 250 mm with one or two sepa-
rating retainers and the 350 mm duct width is always equipped with
two separating retainers.
Various cassettes and service outlets can be mounted in the
screed-covered duct system using the underfloor junction boxes/
underfloor device sockets. They can be equipped with electrical
resources. Sockets, data and multimedia connections can be used
with the Modul 45 series.
3.2 Installation
principle
Fig. 2:
3
2
1
6
5
4
Installation principle of the screed-covered duct system
Components in the floor cross-section (floor structure/height condi-
tions may deviate depending on the floor planning):
–
1
Floor covering
–
2
Floor
Summary of Contents for EUK
Page 4: ......
