Objet Geometries Ltd Eden330\333 User Manual
4 - 33
8.
After Head Replacement – Automated Weight Test:
When head replacement has been completed, the application will
perform an automated weight test in order to detect and set the head’s
weight properties.
What is a ‘Weight Test’?
A weight test is an automated test mode,
whereby the system prints a set of 8 rectangles (one from every head),
lasting about 25 minutes. Examination of these rectangles (from each
head) will assist in determining the heads’ exact jetting properties.
Once weight test printing has been completed – the user will be required
to weigh the rectangle printed by the newly replaced head and enter its
weight measurement into the Wizard.
Screen 44
: The automated weight test printing will last about 25 minutes.
Created by Neevia Personal Converter trial version
http://www.neevia.com
