Objet Geometries Ltd Eden330\333 User Manual
4 - 26
6. Step 4:
Replacing a Head – Installing New Head:
6.1 Remove the new head from its packing, and record the head S.N.
Figure 31
: Gently, remove the head from its packing.
Figure 32
: Insert the new head into position. Note the ‘Front’ and ‘Back’
markings on head driver’s cover (connector on head driver
should be on the back of the head).
Also, ensure that the rubber O-ring exists at both ends of the head,
as shown above.
Created by Neevia Personal Converter trial version
http://www.neevia.com
