OBID ID RW01L.AB-A, Manual, Page: 21 / 39

OBID
®
Manual ID RW01L.AB-A
FEIG ELECTRONIC GmbH Page 21 of 39 H20801-1e-ID-B.doc
3.2. [0x14] WRITE_DB (Write data block(s))
Command for writing data to the selected transponder
Host
→
Reader:
1 2 3 4 5...8, 12, 16, 20 n
9, 13, 17, 21 COM-Adr [0x14] DB-ADR DB CSUM
Host
←
Reader
1 2 3 4 5
5 COM-Adr [0x14]
Status
1
CSUM
DB-ADR:
Physical address of the transponder starting at which the data contained in DB will be written
to the transponder (see also:
APPENDIX C: Memory model ID DTx.B ).
NOTE:
In contrast to the readers in the OBID
®
ID RW family, the OBID
®
ID RW01L.AB-A reader
works directly with the physical addresses of the transponder. DB-ADR = 1 is used for
example to read and write the configuration of the transponder for a transponder type
ID DTx.B.
DB:
Data of any desired content for writing to the transponder. DB has a length of 4, 8, 12 or 16
bytes.
1
see APPENDIX B: List of status bytes