15
OBH Nordica Manicure and Pedicure set
Before use
Before you use the appliance for the first time, read the instruction manual carefully, and save
it for future use.
Attachments
Sapphire cone
Gently removing dry skin, hard skin and calluses from the soles of the feet and
heels.
Felt cone
Polishing the edge of the nail after filing as well as for cleaning the nail surface.
Always polish in circular movements and do not let the felt cone rotate at the
same place during a longer time.
Sapphire grinding disk
Filing and shaping nails. The external head is not rotating to make careful
shaping of the nails easier and to avoid burning the skin at the same time.
Sapphire cylinder
Treating the surface of the nails to reduce thickness and prevent ingrowing
nails.
Sapphire small cylinder
Treating ingrowing nails by reducing thickness both on surface and under the
nail edge.
Sapphire circle
Gently removes hard skin on corns.
Use
This appliance is intended for treatment of hands (manicure) and feet (pedicure). Select
suitable attachment and slide it into the opening of the appliance using slight pressure. To
remove it, pull the attachment and the appliance apart while keeping them in a straight
position. Before starting the appliance, make sure the switch is in position at 0. Start the
appliance by pressing the switch and select the required speed. Always start with a lower
speed and increase speed carefully.
All grinding and filing attachments have a sapphire coating, which guarantee life long
quality.
Always press the attachment carefully to the surface to be treated. Guide the appliance in
circular movements over the parts to be treated. The grinding attachments will have no effect
on softened or moist skin. Therefore, do not use the appliance with water or in a foot bath.
6002_MI_0508.indd 15
2008-05-09 11:38:02
