Wipe the inside and outside of the appliance with a damp cloth. The
appliance works by producing hot air. Do not fill the bowl (A) with oil or
frying fat.
Preparing for use
1. Place the appliance on a flat, stable, heat-resistant work surface away
from water splashes.
2. Do not fill the bowl with oil or any other liquid.
Do not put anything on top of the appliance. This disrupts the airflow
and affects the hot air frying result.
Using the appliance
Easy Fry can cook a large range of recipes. Cooking times for the main
foods are given in the section ‘Cooking Guide’.
1. Connect the power supply cord to an electrical socket.
2. Carefully pull the bowl out of the appliance.
3. Place the food in the bowl.
4.
Note:
Never fill the bowl beyond the MAX level mark or exceed the
maximum amount indicated in the table (see into section ‘Cooking
Guide’), as this could affect the quality of the end result.
5. Slide the bowl back into the appliance.
6. Caution: Do not touch the bowl during use and for some time after use,
as it gets very hot. Only hold the bowl by the handle.
7. Move the temperature control knob to the required temperature. See
section ‘Cooking Guide’ to select the right temperature
8. Select the required cooking time (see section ‘Cooking Guide’).
9. To switch on the appliance, turn the timer knob to the required cooking
time.
10. Add 3 minutes to the cooking time stated in the tables on pages 7 and
8 when using the appliance from cold.
11. To set a short time, turn the timer knob until 10 minutes and then go
back to the desired time.
12.
Note:
If you want, you can also let the appliance preheat without any
food inside. In this case, turn the timer knob to more than 3 minutes
and wait until the heating-up light goes out (after approx. 3 minutes).
Then fill the bowl and turn the timer knob to the required cooking time
(see Cooking Guide for timings).
13. The timer starts counting down the set cooking time.
14. The heating-up light goes on.
15. During the hot air frying process, the heating-up light goes on and off
from time to time. This indicates that the heating element is switched
on and off to thermostatically maintain the set temperature.
16. Excess oil from the food is collected in the bottom of the bowl.
17. Some foods require shaking halfway through the cooking time (see
section ‘Cooking Guide’). To shake the food, pull the bowl out of the
appliance by the handle and shake it. Then slide the bowl back into the
appliance.
57
AG5018S0_ AG501DS0 easy fry mek_RS_0921.indd 57
AG5018S0_ AG501DS0 easy fry mek_RS_0921.indd 57
2021-10-08 17:33
2021-10-08 17:33
