OBH Nordica CURLING IRON 13, Instructions Of Use

Page: 15 / 20

OBH Nordica Curling iron
Before Use
Before the curling iron is used for the first time, read through the instruction manual carefully
and save it for later use.
Use
Plug the appliance. Press ON/OFF switch until the LCD display lights red, the curling iron
is pre-set on 120˚C. If you want to change the temperature, use the + and - buttons on the
handle. The display will light red until chosen temperature is reached and then change colour
to green. The curling iron has variable temperature setting (120-200˚C) with 5˚C interval.
Select temperature setting depending on your hair type, see below. Note that the display
shows 199˚C at the highest.
120-135˚C low temperature – fine, fragile coloured hair
140-155˚C medium temperature – normal hair
160-175˚C medium/high temperature – thick, dense hair
180-200˚C high temperature – very coarse hair
Place the curling iron with the ON/OFF switch upwards on a flat surface that sustains heat.
The stand should be in vertical position.
Dry your hair with a hair dryer until it´s completely dry before you use the curling iron. Open
the press and place the 5 cm hair section under the spoon. Spread the hair section
evenly and roll the iron towards the scalp. If you just want to curve the hair ends you
just place the ends in the clamp and wind once. Hold in place for 5-8 seconds depending
on the length and texture of the hair. Open the clamp and release the curl from the iron. To
maintain the curl let the hair cool before combing or brushing.
If you want screw curls, roll up less hair. The more hair your roll up, the softer larger curls
you get.
Note! Keep the heated parts away from scalp, face, neck and hands. Never use the
appliance on wigs and artificial hair without testing on a small hair section first, otherwise the
wig/artificial hair may melt.
Key lock
To prevent accidental pressing of the control buttons during styling, double click the ON/OFF
button. A key symbol will appear on the screen when the buttons are locked. To unlock,
double click the ON/OFF button again.
Auto-off function
The curling iron can be programmed for automatic shut off mode after 20-60 minutes. Press
+ and - buttons at the same time for 2 seconds. The display will show “30” and a clock
symbol. You can now adjust the time with the + and - buttons to desired setting. To activate
chosen setting, press ON/OFF and you can continue to use the curling iron. When selected
time is reached the clock symbol will flash and the curling iron will switch off, the display
shows “)” and turns off.
15
5813, 5860, 5862, 5864_030408.indd 15 2008-04-03 15:48:19