20
14.
Caution: In order to avoid a hazard due to inadvertent
resetting of the thermal cut-out, this appliance must not be
supplied through an external switching device, such as a
timer, or connected to a circuit that is regularly switched on
and off by the utility.
15. Always examine appliance, cord and plug for damage before
use. If the supply cord is damaged, it must be replaced by
the manufacturer, or his service agent or a similarly qualified
person in order to avoid a hazard.
16. For additional protection the installation of a residual
current device (RCD) with a rated residual operating current
not exceeding 30 mA is recommended. Ask your installer for
advice.
17. The appliance is for domestic use only.
18. If the appliance is used for other purposes than intended, or
is it not handled in accordance with the instruction manual,
the full responsibility for any consequences will rest with
the user. Any damages to the product or other things are
not covered by the warranty.
Before use
Before the appliance is used for the first time please read the instruction manual
carefully and save it for future use.
How to use the toaster
Put the toaster on a heat-resistant, plane surface.
NOTE!
Always keep an eye on the toaster when in use and do not place it close to or
under curtains, cupboards or other combustible material.
Put the bread on the grid and plug the appliance. Turn the timer to the wanted
degree of toasting (1-7), the further up the scale, the longer toasting cycle. Switch
on the toaster by pressing the on/off button and the lamp will be on. When the
toasting is done, the toaster switches off automatically and you will hear a beep
sound. Turn the bread and switch the timer to the wanted toasting cycle to toast
the other side of the bread, turn on the on/off button and the toasting begins.
If you want to interrupt the toasting, press the on/off button and the signal lamp
goes out. Unplug after use.
2632_KK_UVN_081113.indd 20
11/8/2013 11:38:24 AM
