27
OBH Nordica White Satin / Black Marble vacuum cleaner
Before use
Before the vacuum cleaner is taken into use for the first time, please read this instruction manual
thoroughly and keep it for future use.
General description
A
Hose connector
B
Hose
C
Suction power regulator on handle
D
Telescopic tube
E
Floor brush
F
Lid for accessory compartment
G Foot pedal for cord reel
H Parking system (short term) (not visible on illustration)
I Electronic suction power regulator
J On/off foot pedal
K Release handle for dust compartment
L Dustbag full indicator
Assembling the vacuum cleaner
The hose connector (A) is attached to the vacuum cleaner’s air intake duct (see above). Then fit the
hose handle to the telescopic tube (D), and finally attach the floor brush (E) to the other end of the
telescopic tube. The telescopic tube is equipped with a click system at the handle as well as at the floor
brush. Consequently, it is important to make sure that both hose and floor brush are correctly attached
to the telescopic tube. When the hose or the floor brush is disassembled, press the appropriate button
on the telescopic tube.
If the hose must be disassembled from the vacuum cleaner, press the two buttons on the sides of the
hose connector while simultaneously pulling upwards.
IMPORTANT!
Only attach the original hose connector to the vacuum cleaner’s air intake duct. Never use
hoses from other vacuum cleaners as these may get stuck .
E
G
L
I
J
A
K
F
D
C
B
