OBH Nordica 1387, Instructions Manual

Page: 30 / 36

Timer
The timer can be set from 1 hour up till 8 hours. After set time has el-
apsed, the fan will automatically switch off. Push the button with the clock-
symbol; one press gives 1 hour, two presses gives 2 hours, three presses
gives 4 hours and four presses gives a timer setting of 8 hours. If you wish
to stop the timer prematurely, push the clock-button until all timer values
have disappeared in the display.
Setting the time in remote control
Use a pointed object and push carefully one time at ”SET”; hours start to
flash. Set hours by pushing ”ADJUST”. Confirm hours by pushing ”SET”
and by then also minutes start flashing. Set the minutes by ”ADJUST” and
confirm finally by pushing ”SET”.
Oscillating
Push the oscillation button to choose oscillation of the fan.
Following settings can be made:
Horizontal oscillation
Vertical oscillation
Double oscillation, both horizontal and vertical.
To turn off the oscillation, push the button.
Adjusting the airflow
The airflow can be adjusted by tipping the fan upwards or downwards.
Turn off the fan and wait till the fan blade stops to rotate before you adjust
the fan to desired position.
Ionising effect
The fan has an automatic ionising-function that’s activated when the fan is
switched on and deactivated when the fan is switched off. Ionising gives a
better air quality.
Cleaning
• Turn the appliance off and pull the plug before cleaning.
• Clean the plastic parts with a mild detergent and a damp cloth. Never
use chemical detergents.
• The appliance and it´s cord can never be immersed in water or any
other liquid.
30.