6
After mounting the quick-release
plate to your camera, ensure
that all knobs except for the
quick-release knob are tightened
on the ballhead. Loosen the
quick-release knob by turning it
counterclockwise until it stops.
Mount the camera to the ballhead
by sliding one edge of the quick-
release plate into the ballhead,
then lower the other side until the
quick-release plate is lying flat in
the quick-release clamp. Turn the
quick-release knob clockwise to
lock the plate.
Remove the quick-release
plate from the ballhead by
turning the quick-release
knob counterclockwise. This
loosens the quick-release
clamp, allowing you to remove
the quick-release plate. Mount
the quick-release plate to the
threaded hole on the base of
your camera. Use the supplied
hex key to tighten the screw.
The plate utilizes a 1/4
″
-
20 screw that will fit most
cameras.
Warning: Some manufacturer’s plates do not meet our
specifications and may not lock your equipment securely
in the Oben quick-release clamp. Please test all camera
and lens plates made by manufacturers other than Oben
to ensure compatibility.
4. Mount Quick-Release Plate
5. Mount Camera
oPErAtIon
