5
The single Locking Knob locks
and unlocks the ballhead, which
allows you to change the position
of the camera. When changing
camera position using the Locking
Knob, always keep one hand
on the camera. Turn the knob
counterclockwise to unlock the
head and clockwise to lock it.
Ensure that the knob is firmly
tightened before letting go of the
camera.
For tripods with a 1/4
″
threaded
mounting stud: insert the
supplied Reducer Bushing into
the threaded mounting hole of the
head to enable a proper fit.
oPErAtIon
To mount the ballhead on the
tripod, first tighten all of the
knobs on the head. Then, being
careful to properly align the
tripod stud and the ballhead hole
to avoid damaging them, rotate
the ballhead clockwise onto the
tripod, and tighten it by hand.
1. Mount Ballhead To Tripod
2. Converting Mounting Thread
3. Main Locking Knob Operation
