Obdstar X300 DP, User Manual

Page: 13 / 46

OBDSTAR
9
：
Transfer into chinese-English input method.
：
Insert white space.
：
Transfer into number input method.
：
Punctuation mark interface.
：
Transfer capital and small letter.
:
English association input.
2.11 HOW TO SET AS AIRPLANE MODE
According to the regulations of some countries or areas, PC device must be turned off before
boarding on the airplane. The way to disable functions of X-431 PRO is to set it as airplane mode.
In this mode, all wireless radio waves will be disabled, including mobile network, Bluetooth and
WLAN.
Do one of the followings to enable or disable airplane mode:
● Press POWER key and choose “Airplane mode” from the pop-up option menu.
●Access the main menu, and choose “Settings” > “WLAN” > “More…” >“Airplane mode”.
3 HOW TO DIAGNOSE
3.1 CONNECT VCI CONNECTOR
Procedure to connect VCI connector:
1. Locate vehicle’s DLC socket. The DLC (Data Link Connector or Diagnostic Link Connector) is the
standardized 16-cavity connector where diagnostic code readers interface with the vehicle's
on-board computer. The DLC is usually located 12 inches from the center of the instrument panel
(dash), under or around the driver’s side for most vehicles. If Data Link Connector is not located
under dashboard, a label should be there telling location. For some Asian and European vehicles,
the DLC is located behind the ashtray and the ashtray must be removed to access the connector.