Obdstar X300 DP, User Manual

Page: 14 / 46

OBDSTAR
10
If the DLC cannot be found, refer to the vehicle’s service manual for the location.
2. Plug the VCI diagnostic connector into the vehicle’s DLC socket (It is suggested to use the OBD
2 extension cable to connect VCI connector and DLC socket.). For non-16PIN DLC socket, please
select the corresponding non-16 pin connector adapter, then plug the non-16pin end
of the adapter into the DLC socket, and then connect the standard 16pin end VCI connector.
3.2 Bluetooth Setting
1
．
Enter Key Master to set System setting, and choose VCI information.
2
．
Operate according to following prompt:
A.”Please match
：
VCI_888888888888(Bluetooth name)”
b
．
“Connected
：
VCI_888888888888(Bluetooth name)”
C
．
“Not connected
：
VCI_888888888888(Bluetooth Name)” Please connect VIC connector to
vehicle, Key Master DP will connect automatically.
3.3 DIAGNOSIS FLAWCHAT
For new users, please follow the operation shown in 3-2 to get familiar with and start using Key
Master DP.