OBaby ZeZu Pramette, Instruction Manual

Page: 5 / 7

fig. 34 fig. 35
Using the Harness
Press
Lift
Fitting the Seat Unit
The seat unit can face either forwards or backwards.
To put the seat unit onto the chassis, line up the seat coupler with the chassis fittings on
each side and lower onto the chassis (fig. 31 & 32), ensure it clicks into place on both
sides (fig.33).
To remove the seat from the chassis, press both release buttons on each side of the seat
unit (fig.34) and lift the seat up, away from the chassis (fig.35).
fig. 31 fig. 32 fig. 33
“Click”
fig. 25
fig. 28
fig. 26
fig. 29
fig. 27
fig. 30
Press
Waist
Strap
Crotch
Strap
Chest
Strap
Clasp
To fasten the harness, insert both fasteners on the waist strap into the clasp on the
crotch strap (fig.25) and clip each chest strap onto the waist strap (fig.26 & 27).
To release the harness, press the button in the centre of the clasp and remove the waist
strap fastners (fig.28).
Adjust the harness length using the buckles on each strap (fig.29).
‘D’ Ring
The ‘D’ rings highlighted are provided for fitting a separate harness complying with BS
6684 (fig.30).
WARNING: Always use the crotch strap in combination with
the waist belt
WARNING: Ensure that all locking devices are engaged before use
8
9
www.obaby.co.uk
www.obaby.co.uk