OBaby Aura, Instruction Manual

Page: 5 / 8

Fitting and Removing the Hood
Adjusting the Hood
fig. 24
fig. 27
fig. 25
fig. 28
fig. 26
fig. 29
To fold the hood, pull the hood adjusters up on both sides of the hood, as shown.
fig. 30
fig. 33
fig. 31
fig. 34
fig. 32
fig. 35
Using the Harness
Press
To fit the hood, place the hood on the chassis, inline with the seat unit. Clip the hood
catches onto each side of the chassis (fig.24-26).
To remove the hood, lift the catches either side of the hood (fig.25).
Waist
Strap
Crotch
Strap
Chest
Strap
Clasp
To fasten the harness, insert both fasteners on the waist strap into the clasp on the
crotch strap (fig.25) and clip each chest strap onto the waist strap (fig.26 & 27).
To release the harness, press the button in the centre of the clasp and remove the waist
strap fastners (fig.28).
Adjust the harness length using the buckles on each strap (fig.34).
‘D’ Ring
The ‘D’ rings highlighted are provided for fitting a separate harness complying with BS
6684 (fig.35).
WARNING: Ensure the harness is correctly fitted before use. The harness should
always be adjusted to fit correctly. Children should be harnessed in at all times.
Always use the crotch strap in combination with the waist strap.
8 9
www.obaby.co.uk
www.obaby.co.uk