OBaby Aura, Instruction Manual

Page: 7 / 8

fig. 45 fig. 51
fig. 48 fig. 54
fig. 46 fig. 52
fig. 49 fig. 55
fig. 47 fig. 53
fig. 50 fig. 56
Fitting the Car Seat on the Chassis
To fit the car seat adaptors, place the adaptors onto the side frame of the chassis either
side of the seat (fig.45), ensure the locator hole on the adaptor is in line with the stub on
the frame and clip the adaptors securely onto the chassis (fig.46 & 47).
Lower the car seat on to the adaptors (fig.48) ensuring it clicks into place on both sides
(fig.49).
You can adjust the handle position by pressing the red button on either side of the car
seat (fig.50).
To remove the car seat, lift the release buttons on either side of the car seat
(fig.51 & 52) and lift the car seat away from the adaptors (fig.53).
To remove the car seat adaptors, lift the lever to unclip the adaptor (fig.54 & 55) and
remove the adaptor from the frame (fig.56).
“Click”
WARNING: When using the car seat on the chassis, ensure the adaptors and car seat
are correctly engaged before use.
Removing the Car Seat from the Chassis
Lower
Press
Lift
Lift
Lift
12 13
www.obaby.co.uk
www.obaby.co.uk