Section 4: Installation
14
FOR FILTERED MODEL ONLY.
Connect the preassembled water source line to the shutoff valve. Note that there is an
in-line strainer inside the copper tubing of the water source line
. IMPORTANT
:
It is
required to keep in-line strainer in system for unit to function properly; removing
strainer can cause damage to solenoid valve and/or cartridge system (if
applicable)
. DO NOT turn the water on. Next, connect the filter water-out line which is
connected to the cold tank inlet, to the filter outlet fitting.
Cold Tank
Inlet
Water
Source Line
Filter Inlet
Filter Outlet
Filter Water-Out
Line
9.
Water
Source
