Oasis I Series, Installation & Operation Manual

Page: 19 / 36

6.2 Func
ti
ons of the Controller
6.2.1 Start-up & Shutdown
Only from the main screen, the unit can be turned on of o
ff
. If the half or full-o
ff
screen appears, press any key to go
back to the main interface.
When the unit is started using the controller, if the emergency switch was used to shut it down the controller will
display as follows; the opera
ti
on will be the same as the regular ON/OFF screen.
6.2.2 Switching Modes
To switch modes, from the main menu short press the MENU bu
tt
on to choose from Hea
ti
ng, Cooling or Auto
modes. A symbol will display on the controller according to what mode is ac
ti
ve. A
ft
er 2 seconds without a change,
the se
tti
ng will be saved.
If the unit is defros
ti
ng, the defros
ti
ng symbol will display on the main interface. A
ft
er defros
ti
ng is complete, the
unit automa
ti
cally switches to Hea
ti
ng or Auto mode depending on what was on prior to defros
ti
ng. Under
defros
ti
ng the mode can be switched however the unit won’t apply the mode un
ti
l defros
ti
ng has been completed.
6.2.3 Se
tting
the Target Temperature
From the main menu, press the UP or DOWN keys to adjust the temperature se
tti
ng as desired. If you press the
ON/OFF bu
tt
on during this, you will be taken back to the main menu with no changes saved. If there is no opera
ti
on
for 5 seconds or the MODE bu
tt
on is pressed, the adjustments to the temperature will be saved and you will return
to the main menu.
1 7
11