Oasis I Series, Installation & Operation Manual

Page: 11 / 36

5
3. Quick Start Guide
IMPORTANT THINGS TO NOTE
฀
Ensure you meet the minimum clearances and recommended installa
ti
on loca
ti
ons as outlined in the
manual.
฀
All heat pump accessories are contained in a plas
ti
c bag inside the packaging of your heat pump unit.
PRE-INSTALLATION
1. Posi
ti
on the heater on a level pad in the desired loca
ti
on on the pool water return line (as shown in the example
image below).
2. Install the supplied an
ti
vibra
ti
on rubber pads under the feet of the unit.
3. Install the supplied condensa
ti
on barb to the underside of the unit and direct the condensa
ti
on to an
appropriate drainage point.
PLUMBING INSTALLATION
PLEASE NOTE: Oasis heat pumps standard plumbing
fitti
ng size can accept 40mm NB PVC pipe for connec
ti
on to
the pool or spa
fil
tra
ti
on plumbing.
1. A
tt
ach the supplied barrel unions to the cold inlet and hot outlet (hand
ti
ghten).
2. Use plumbing tape and ensure the ‘O’ ring is in posi
ti
on when sealing.
3. Install a 3-way valve at the cold-water inlet and create a bypass by connec
ti
ng a “T” piece to the heated line.
4. Make the plumbing connec
ti
ons and brace pipework where necessary.
9
11