7
MAINTENANCE FUNDAMENTALS: FRONT PANEL / FRONT GRILLE / FLUORESCENT LIGHT FIXTURES
1. Removing the Front Panel
•
Lifting the panel from lower edge upward
approximately a half inch into a channel lip,
disengages the support taps on the lower edges.
•
Pivot out lower edge approximately one inch and
lower panel to remove.
2. Removing the Front Grille
•
Lifting the grille upward approximately a half inch
disengages a top support flange and the support
taps on the back lower side of the grille from the
frame .
•
Pivot out lower edge and remove grille.
3. Light Fixtures
-
Fluorescents
Removal of lamp:
•
Rotate lamp (1/4 turn) either direction to
disengage (upper or lower) pins/contacts from
lamp mounting sockets.
•
Remove bulb buy applying even pressure from the
back side at the bulb ends and pulling the
remaining contact from the sockets.
Installation of lamp:
•
Align pins with slot.
•
Insert pins into socket by rotating the bulb 1/4 turn
to secure either the (upper or lower) pined
contacts into the sockets.
•
Rotate the remaining bulb contacts (1/4 turn) into
the remaining lamp mounting socket contacts.
4. Light Fixtures
-
Power Cord & Plug, LEDs, Etc.
•
See next page.
Channel Lip
Support Tabs
Upper Front Panel
Front Grille
Support Rest
Support Tabs
Support Flange
Lamp Pins
Light Socket
Light Fixture
