11
REFRIGERATION FUNDAMENTALS
1. Temperature & Defrost Control
•
The case temperature is set at the factory, as
determined by the case size. The temperature is
controlled by a thermostat. If a temperature setting
change is required, follow the instructions for the
Temperature Control Programming Steps in the
technical information section of this operating
manual.
•
If service is required to the temperature control
unit, call Structural Concepts. This maintenance
should be performed by a certified technician.
2. Evaporator Fan Access
•
Remove lower decking. A finger hole is provided to
assist in lifting up and pulling out deck.
3. Expansion Valve Access
•
Remove lower decking. A finger hole is provided to
assist in lifting up and pulling out deck.
•
Remove fan shroud assembly.
•
Unplug the fan at the shroud support.
•
Remove four screw knobs from the fan shroud.
•
Carefully remove shroud to avoid damage to
mirrors or front air deflector.
4. Refrigeration:
Access and Connections
•
Assembly or disassembly and servicing to be
accomplished by licensed refrigeration
contractor.
•
Refer to maintenance fundamentals for access.
•
Remove front panel.
•
Remove front grille.
Front of Case
Sight Glass
Refrigerant Service Fittings
Hot Gas Evaporator
Temp. Controller
Lower Decking
Evaporator Fan
Fan shroud
